Genuine Synthi filter made under license from EMS. Equipped with synovatron euroadapter.
This legendary filter can be switched between pre1974 and post 1974 filter type and response. For the first time response can be voltage controlled which was designed on the circuit board but not available on the matrix.
The only officially licensed remake of the EMS diode lowpass filter used in the VCS3 and AKS synths. It´s a faithful recreation of the original circuit, featuring some modifications that are also done on vintage EMS equipment, like a switchable faster CV response option for very quick modulations. Another switch determines if the filter has -18dB/oct slope as used by EMS pre-1974 or a slope of -24dB as used after 1974. The cutoff frequency and also the resonance are voltage controllable. Signal inputs and outputs have level controls.
USAGE WITH EURORACk
This EMS filter will be equipped with the Synovatron adaptor for easily integration with eurorack systems. With this adaptor you can easily connect a module by Analogue Systems to an Eurorack bus board without changing the power cable.
Because of the different position of the mounting holes there will be a gap of 0.5HP (= 2.5 mm) when mounting an Analogue Systems module next to a Eurorack module. Take this into consideration when planning your system. Gaps can be covered with 1.5HP wide blank panels by Doepfer.
Cutoff: 1x CV-Eingang (1V/oct) und 1x mit Abschwächer
3U Analogue Systems module, 12HP wide, 65mm deep
35-70mA power consumption